Skip to main content
window at home

Most Common Water Heater Issues and How to Solve Them

If you ever had a misfortune of having issues with your water heater, you probably wished you were more experienced or at least more informed on the matter, especially when finding the easiest and the most hassle free solution is concerned. On the other hand, you are certainly blessed if you never had any water heater issues at all. No matter which group you belong to, being familiar with potential problems would surely prove helpful in the future. This is why you should perhaps take a look at the most common water heater issues and the most practical solutions for them.
Read More

man almost on the water

Top 3 Sources of Water Damage and Tips to Avoid Them

Mold Thrives with Moisture

In order to grow and thrive, mold needs moisture. This creates a problem for homeowners that don’t want to share their space with mold. The trick, is getting ahead of mold.

That means knowing where to look and then learning how to prevent the growth of mold in those areas.

The top three sources that can attain water damage, and thus a mold problem are :

  • Washing Machine Hoses
  • Shower Tile Grout
  • Water Heaters

How to Avoid These Mold Invitations

One of the most important things to do in order to avoid mold growth in any of these areas, is to maintain a regular “check-up system” in your home.

Ignorance can lead to bigger problems, so be sure to know if there is a chance of mold growth.

Washing Machine Hoses

According to Vicki Lankarge, author of What Every Homeowner Needs to Know About Mold (And What to Do About It), washing machine valves should be turned off after each use to prevent bursting and leakage.

Shower Tile Grout

It is very important to make sure tile grout is applied properly, especially in showers or other water present areas. If the grout you already have is not up to par, replacement could be your best option.

To do this :

  • Remove old grout with a grout saw
  • Clean the surface of the tiles
  • Mix grout according to the instructions on the package
  • Apply grout to the surface with a grout float, spreading in a diagonal direction
  • Allow the grout to sit for 10 minutes or according to directions
  • Wipe the surface of the tile with a damp sponge to remove any excess grout
  • Allow to dry for another 10 minutes until you see a white haze, wipe this haze with the sponge

Water Heaters

When dealing with water heaters, it is important to know how much water is in your heater. Every 6 months, it would be wise to completely drain your water heater.

Here’s How:

  • Turn off the electricity or gas supply
  • Attach a hose to the drain valve at the base of the heater, and the other end to a drainage bucket
  • Allow the water to drain until it becomes clear
  • Close the drain valve and and open the cold water valve to refill the tank
  • Restore electricity or gas

Regular Maintenance

Remember to check each of these items in your home as well as other water related appliances. Regular maintenance is the key ingredient to keeping your home safe and free of mold.

Further Recommended Reading :

Joslyn from the MoldBlogger Team

Information Source : What Every Home Owner Needs to Know About Mold (And What to Do About It)
by Vicki Lankarge Pages 39-43.

Want The Inside Scoop?